You have no items in your shopping cart.
Tips to Create An Effective Earthing System of Electric FenceNov 08, 2019
Earthing your electric fencing is as essential as choosing a fence energizer or planning the layout, yet is often ignored. As per a recent study it has been found that up to 80 per cent of all electric fencing malfunctions are because of poor earthing. When an animal comes into contact with the wire, the current flows through the animal down to the ground, and returns to the energiser. An effective earthing system of an electric fence wire will enable the animal to feel an effectual shock and allow an unrestricted flow back to the energiser.
An electric fence system that is not grounded properly will not perform up to its maximum prospective and might not sufficiently include the livestock or keep intruders out. The simple ways to create a effective earthing system for fencing are mentioned below:
•Conductivity of the soil
•The productivity capability of the energizer
•Type of intruders or livestock being managed
An energizer should be grounded properly to understand its complete potential. The larger the productivity of a charger, the more grounding rods will be required. A common rule is to set-up at least three feet of ground rod. The wetter and lower the ground they are set up, the excellent their presentation will be. Most grounding rods are prepared from copper or galvanized steel and it is vital that the kind of wire used to attach the energizer to the ground rod be the same like that of the rod. Doing so will assist to reduce the lessening of performance from electrolysis.
Tips on Popular electric fence wire installation
There are lots of things you can do to obtain the finest from your electric fence. Check these ideas to make your fence attain its full prospective:
•Correct Metals- The most excellent ground rods are made from galvanized metal or copper and are at least 4 feet long.
•Incorrect Metals- A simple pipe makes poor grounding rods. These are typically made of metals that will decay after just a few years in the ground and cause your system to be unsuccessful.
•Match Metals- Do not mix metals when you are connecting, clamping or installing your ground rods. When you use diverse metals, you trigger a reaction known as electrolysis, which will corrode these connections.
•Examine-Pay attention to your voltage to make sure you have sufficient grounding. Monitoring during the wettest part of the year and the driest is highly suggested.
•More Rods- If you are not happy with the shock your fence is offering, include more ground rods. This offers a more influential shock.
•Utilities- Do not place your ground rods close to your lines or utility poles. If they are too close, you can see a disturbance of your electrical or phone service.
•Moisture Absorber- Another choice to create better a ground in dry soil is by drilling a huge than normal hole and filling it with bentonite after inserting grounding rod. This substance will wick moisture, and create a stronger current.
These are some points to consider when creating an effective earthing.
Posted in News By