Electrical fences are one of the most secure forms of fencing as far the safety of property is concerned. In case of a simple mistake when installing your fence, there is a possibility that you are putting your property at high risk. Mentioned below are some of the common electric fence mistakes that you should avoid:

Using an insufficient fence energiser

A fence energiser supplies power to the fence. If you want to do appropriate fencing and make sure there is inadequate power in the fence, your fence energiser should line up with the fence size and the animals and property you are shielding. The weightier the kind of animals you are safeguarding or trying to protect from, the more the capacity of the fence energiser you require: A bull will require a larger capacity charger than a lamb because of the differences in weight of these animals. Thus, the appropriate fence energiser is important.

Not having the correct size corner posts

Setting up the corner posts properly, ranks at the top of the list when it comes to constructing a quality electric fence for your property. No matter what kind of fence you construct, be it a barbed wire fence, high tensile electric wire or woven wire, your corner posts have to be set up appropriately. Two main issues are found with corner posts.

Corner posts that are not anchored down tightly into the ground

The power of your fence will rely on how well your corner posts are placed into the ground, particularly if you have soft or sandy soil. Not observing the required fencing height. Based on why you are fencing your property, you need to ensure the fencing is of the necessary height. If you are buying electrical fences to keep thieves away, you need to make sure your fence is atleast 6 ft high so that they may not jump over the property. You should watch a similar thing when fencing your animals off.

Not enough grounding

For electric fencing, grounding or earthing is very essential. Grounding rods act as antennas for getting electrons and completing the circuit back to the energizer. If grounding is not enough, the electrons in the circuit cannot find its trail back to the fence, and the shock will be unsuccessful. The wide-ranging rule of thumb is to use three feet of grounding rod per joule of energy production. Galvanized rods are perfect as grounding rods. They are not as costly as copper and you do not have to fret about corrosion or rust.

These are some of the common mistakes that you should avoid when it comes to installing an electric fence. Make sure that you get details in regarding to the electric fence installation cost as there is no such fixed rate available. It is always better to consult with a reputed company when getting electric fence installation done at your premises or farm area.